Feynlab® Window Coating Kit

PRODUCT DESCRIPTION

FEYNLAB® WINDOW COATING is an ultra-durable, extraordinarily slick, and super hydrophobic window treatment that covalently bonds to glass. Rather than a hydrogen bond or weaker van der Waals forces of attraction over the glass, which wears off quickly, FEYNLAB® WINDOW COATING reacts with the glass, forming a physical bond. These covalent bonds are incredibly difficult to break, which means a durable and long-lasting coating.

PRODUCT BENEFITS

FEYNLAB® WINDOW COATING is an economical and easy to apply professional window coating with extreme durability. Certified installers can confidently offer this product to customers at an extremely competitive price with other coating brands, while equaling or surpassing performance.
Feynlab focused on a glass coating treatment with ease of application, great performance, & durability. Our glass coating system consists of two steps. Step 1 is a cleaner/polish which removes surface grime, contamination, and water spots. Step 2 is a glass coating with deep anchoring film formation technology.
The cleaner/polish step removes all contaminants on the glass, revealing “hydroxyls” which are the reactive sites within the glass that the coating anchors to when it condenses on the surface. Several minutes after installation, a ceramic-like membrane is formed that fills in micro voids of the glass and covers the peaks with protection. While this process takes place at the nano scale level, the beneficial change is visually evident, increasing the ability to “see through” glass.
After the application process is complete, the glass is converted from a relatively reactive surface to one that is chemically inept, stain resistant, hydrophobic, and oleophobic!

WINDOW COATING is only for professional use by FEYNLAB® Approved and Accredited installers. Do not attempt to apply this product without training.

DURABILITY & SPECS

Expected durability includes many variables such as wiper abrasion to the surface and chemical exposure. However, expect six (6) months to a year on the windscreen and two (2) or more years on the side glass and rear window. Application process includes glass polishing and at least one layer of Feynlab® Window Coating.

APPROVED SURFACES
APPROVED SURFACES FOR APPLICATION – DO NOT apply to unapproved surfaces.

Glass ONLY

INCLUDED
10ml of FEYNLAB® WINDOW COATING – sufficient to coat one vehicle (all windows) 50 ml of Window Cleaner Polish.


CAUTIONS
Always wear gloves during application. Eye protection and respirator recommended.


PREPPING THE GLASS
Glass Polishing

• First, thoroughly clean the vehicle glass with FEYNLAB® PURE WASH or FEYNLAB® PURE
• Next, use Feynlab Window Cleaner Polish to remove all grime and film formation on glass
• For optimal glass polishing, apply the window cleaner polish to a microfiber disc using a dual action polisher. Evenly polish the glass, passing over the surface 2-3 Afterward, wipe-off all polish residue from the glass.

Test Glass Cleanliness Before Window Coating Application (VERY IMPORTANT FOR COATING TO BOND PROPERLY)

• After polish removal, it’s critical to test glass readiness before FEYNLAB® WINDOW COATING application to ensure optimal bonding and
• To test, spray or wipe water over the If the glass was fully cleaned by the polish, the glass should be completely hydrophilic, meaning water does NOT bead on the surface.
• If the surface beads water contamination or product is still present on the glass. To remove; complete another polishing When the water falls flat on the glass, the surface is ready for Window Coating application.

DIRECTIONS

Prior to application, place vehicle in well-lit area with temperature ranging from 50°F-85°F (10°C-30°C), and contaminant free. Make sure there are plenty of microfiber towels and either a suede microfiber or applicator sponge.

FEYNLAB® WINDOW COATING APPLICATION INSTRUCTIONS

• Apply enough FEYNLAB® WINDOW COATING on the applicator to fully cover one side window or 1/3 of the front
• Make a “+” (plus) sign with product in the middle of the panel, then wipe around the boundaries of the section creating a
• Next, fill in the framed area with slightly overlapping horizontal (left to right) straight lines over the entire panel. After, switch to vertical overlapping lines. This cross-hatching pattern ensures even application.
• After application, step back and look for any areas missed or those with excess If found, smooth out evenly with the applicator sponge. This will ensure even drying across the glass and minimize excess product usage.

COATING REMOVAL

After 35 minutes have passed, level the product with a clean microfiber towel. (If time allows, and you have the vehicle overnight, the coating can remain for up to 12 [twelve] hours before wiping.) Begin wiping in the same area of the glass where product was FIRST applied.

Removal Method:

• Wipe off WINDOW COATING following same pattern of application, using two clean Microfiber
• Towel A (left hand) will remove (level) the majority of the
• Towel B (right hand) will remove any remaining residue, revealing a clear, glossy window the microfiber towel slides easily

INSPECT

Be sure to carefully inspect your finished glass for clarity and smudges. Check all of your edges, and other tight spaces for any remaining product. It is much easier to remove if you catch it within 20 - 30 minutes.

SHELF LIFE
COATING: Unopened: 2 years // Opened: 1 month (In a normal, climate-controlled environment)
POLISH: 2 years