Feynlab® Tire & Wheel Cleaner

Price range: €22.47 through €359.61 (excl. VAT)

FEYNLAB TIRE CLEANER utilizes smart surfactant technology to easily remove the toughest brown stains, contamination, road grime, and previously applied tire dressings to restore your tire to a factory finish.

Quantity

Clear

Surface preparation is the most important step in the longevity and durability of any last step protection. Utilizing our proprietary smart surfactant technology, Feynlab Tire & Wheel Cleaner quickly removes the toughest browning stains, road grime, grease, oil, brake dust and even years of old silicone dressing build up from your tires. What’s left is clean even surface, ready for protection and sheen by Feynlab Black Velvet.

Feynlab Tire & Wheel Cleaner contains emulsifiers and deep cleaning surfactants that loosen and remove all foreign surface particles from rubber tires, immediately pulling out any embedded contamination and dressing buildup. It is safe for use on clear coated wheels that may or may not contain a ceramic coating. Do not use on bare magnesium.

After a deep cleaning, follow up with Feynlab Wheel & Caliper for long term protection and shine.

Product Benefits:

FEYNLAB TIRE CLEANER utilizes smart surfactant technology to remove the toughest brown stains, contamination, road grime, and previously applied tire dressings.
Body shop safe – 100% silicone free.

Approved Surfaces:
APPROVED SURFACES FOR APPLICATION ONLY: – DO NOT apply to unapproved surfaces

Rubber Tires.
Will not damage clear coated rims.
Will not damage clear coated rims that have been treated with Feynlab Ceramic Wheel and Caliper.

DO NOT USE:

As a replacement for wheel acid or other products that dissolve brake dust from rims.
On magnesium rims.
As a maintenance tire cleaner for tires already treated with FEYNLAB BLACK VELVET. For these, clean tires with FEYNLAB PURE WASH.

Included:
A 500ml bottle with sprayer.

Cautions:

It is recommended to wear gloves and a respirator during application.

Directions:
To ensure a good experience with the product, place vehicle in a well lit, temperature controlled 10°C-30°C (50°F-85°F) environment.

Application Instructions:

Put on protective gloves. Spray Feynlab Tire & Wheel Cleaner evenly from the bottom to the top of the tire. Allow product to dwell at least 10 seconds, then scrub tire with a stiff bristle brush until you’ve properly removed all visible debris. After scrubbing, rinse the wheel thoroughly with free flowing water.

If you desire to clean both the wheels / rims at the same time, spray uniformly from bottom to top the tires and wheels. Cleaning wheels first, using a soft bristle brush to gently agitate the surface. Next, clean the tire with a stiff bristle brush. Follow this up by rinsing both surfaces thoroughly with free flowing water.

Water Restricted Areas: Spray Feynlab Tire & Wheel Cleaner onto a Microfiber towel, then apply to tires and wheels. If using a microfiber towel, remember to frequently rotate the towel to clean sides in order to maximize cleaning. Often, most contamination will be removed on the first attempt. However, for excessively dirty tires, simply repeat the process! After the Cleaning phase, thoroughly wipe down all newly cleaned tire surfaces with a towel, saturated in water, to remove all product residue from the rubber and wheels.